The goal of gendercoder is to allow simple recoding of free-text gender responses.
This package is not on CRAN. To use this package please run the following code:
devtools::install_github("ropensci/gendercoder")
library(gendercoder)Researchers who collect self-reported demographic data from respondents occasionally collect gender using a free-text response option. This has the advantage of respecting the gender diversity of respondents without prompting users and potentially including misleading responses. However, this presents a challenge to researchers in that some inconsistencies in typography and spelling create a larger set of responses than would be required to fully capture the demographic characteristics of the sample.
For example, male participants may provide free-text responses as “male”, “man”, “mail”, “mael”. Non-binary participants may provide responses as “nonbinary”, “enby”, “non-binary”, “non binary”
Manually coding of such free-text responses this is often not feasible with larger datasets. gendercoder() uses dictionaries of common misspellings to re-code free-text responses into a consistent set of responses. The small number of responses not automatically re-coded by gendercoder() can then be feasibly manually recoded.
gendercoder() includes a sample dataset with actual free-text responses to the question “What is your gender?” from a number of studies of English-speaking participants. The sample dataset includes responses from 7756 participants. Naive coding identifies 103 unique responses to this item.
library(gendercoder)
library(dplyr)
sample %>%
group_by(Gender) %>%
summarise(count = n()) %>%
arrange(-count) %>%
knitr::kable(caption = "Summary of gender categories before coding")| Gender | count |
|---|---|
| female | 1836 |
| Male | 1755 |
| Female | 1722 |
| male | 1705 |
| FEMALE | 113 |
| Female | 113 |
| MALE | 107 |
| F | 88 |
| f | 58 |
| M | 35 |
| m | 33 |
| female | 24 |
| Male | 21 |
| woman | 19 |
| male | 7 |
| masculino | 7 |
| Man | 6 |
| man | 5 |
| Woman | 4 |
| female | 3 |
| Femail | 3 |
| femal | 3 |
| femail | 2 |
| Femalw | 2 |
| Frmale | 2 |
| Gender | 2 |
| 2 | |
| MALE | 2 |
| Masculino | 2 |
| Nonbinary | 2 |
| male | 1 |
| Male | 1 |
| % | 1 |
| 40 | 1 |
| 54 | 1 |
| Agender | 1 |
| agender (woman) | 1 |
| Androgynous | 1 |
| Apache Helicopter… Just kidding. There are only two. I am a Male. | 1 |
| Asian | 1 |
| cis female | 1 |
| Demale | 1 |
| demigirl | 1 |
| emale | 1 |
| famela | 1 |
| feamle | 1 |
| fem | 1 |
| femae | 1 |
| FEMAIIL | 1 |
| Femaile | 1 |
| femake | 1 |
| Femal | 1 |
| FEMAL | 1 |
| femal3 | 1 |
| femald | 1 |
| FEMale | 1 |
| FEMALE | 1 |
| female (Cisgender) | 1 |
| Female (cisgender) | 1 |
| Female to non-binary | 1 |
| Femalee | 1 |
| Femalep | 1 |
| femals | 1 |
| femenina | 1 |
| Feminine | 1 |
| fenale | 1 |
| fmale | 1 |
| ftm | 1 |
| g | 1 |
| G | 1 |
| Gender is a social construct - I’m sexually female | 1 |
| girl | 1 |
| Girl | 1 |
| mae | 1 |
| mael | 1 |
| maill | 1 |
| make | 1 |
| Malae | 1 |
| mALE | 1 |
| MAle | 1 |
| Male | 1 |
| Male. | 1 |
| Male(Sex, Gender is a silly construct) | 1 |
| males | 1 |
| MALR | 1 |
| Man/Male | 1 |
| maoe | 1 |
| masculino | 1 |
| Mslr | 1 |
| nb | 1 |
| NB | 1 |
| Non binary | 1 |
| Non Binary | 1 |
| non-binary | 1 |
| Non-binary | 1 |
| Trans man | 1 |
| transgender | 1 |
| transgender female | 1 |
| Transgender man | 1 |
| transmale | 1 |
| transmasculine | 1 |
| Transsexual male (FTM) | 1 |
| woman | 1 |
Recoding using the gender_coder() function classifies all but 28 responses into pre-defined response categories.
sample %>%
head(10) %>%
mutate(recoded_gender = recode_gender(gender = Gender, dictionary = manylevels_en)) %>%
knitr::kable(caption = "The manylevels_en dictionary applied to `head(sample)`")| Gender | recoded_gender |
|---|---|
| FEMALE | woman |
| FEMAL | woman |
| male | man |
| FEMALE | woman |
| female | woman |
| male | man |
| feamle | woman |
| male | man |
| male | man |
| male | man |
sample %>%
mutate(recoded_gender = recode_gender(gender = Gender, dictionary = manylevels_en)) %>%
filter(!is.na(recoded_gender)) %>%
group_by(recoded_gender) %>%
summarise(count = n()) %>%
arrange(-count) %>%
knitr::kable(caption = "Summary of gender categories after use of the *manylevels_en* dictionary")| recoded_gender | count |
|---|---|
| woman | 4015 |
| man | 3692 |
| non-binary | 8 |
| transgender man | 4 |
| cis woman | 3 |
| girl | 2 |
| agender | 1 |
| androgynous | 1 |
| female | 1 |
| transgender | 1 |
| transgender woman | 1 |
In this dataset unclassified responses are a mix of unusual responses and apparent response errors (e.g. numbers and symbols). While some of these are genuinely missing (i.e. Gender = 40), other could be manually recoded, or added to a custom dictionary.
sample %>%
mutate(recoded_gender = recode_gender(gender = Gender, dictionary = manylevels_en)) %>%
filter(is.na(recoded_gender)) %>%
knitr::kable(caption = "All responses not classified by the built-in dictionary")| Gender | recoded_gender |
|---|---|
| 40 | NA |
| Gender | NA |
| agender (woman) | NA |
| masculino | NA |
| Male. | NA |
| 54 | NA |
| % | NA |
| Female to non-binary | NA |
| Asian | NA |
| masculino | NA |
| masculino | NA |
| masculino | NA |
| masculino | NA |
| Man/Male | NA |
| demigirl | NA |
| femenina | NA |
| masculino | NA |
| Masculino | NA |
| transmasculine | NA |
| Gender | NA |
| Gender is a social construct - I’m sexually female | NA |
| Apache Helicopter… Just kidding. There are only two. I am a Male. | NA |
| masculino | NA |
| masculino | NA |
| Male(Sex, Gender is a silly construct) | NA |
| Transsexual male (FTM) | NA |
| Masculino | NA |
The package provides two built-in dictionaries. The use of these is controlled using the dictionary argument. The first dictionary = manylevels_en provides corrects spelling and standardises terms while maintaining the diversity of responses. This is the default dictionary for gendercoder() as it preserves as much gender diversity as possible.
However in some cases you may wish to collapse gender into a smaller set of categories by using the fewlevels_en dictionary (dictionary = fewlevels_en). This dictionary contains fewer gender categories, “man”, “woman”, “boy”, “girl”, and “sex and gender diverse”.
The “man” category includes all participants who indicate that they are
The “woman” category includes all participants who indicate that they are
The “sex and gender diverse” category includes all participants who indicate that they are
sample %>%
head(10) %>%
mutate(recoded_gender = recode_gender(gender = Gender, dictionary = fewlevels_en)) %>%
knitr::kable(caption = "The fewlevels_en dictionary applied to `head(sample)`")| Gender | recoded_gender |
|---|---|
| FEMALE | woman |
| FEMAL | woman |
| male | man |
| FEMALE | woman |
| female | woman |
| male | man |
| feamle | woman |
| male | man |
| male | man |
| male | man |
sample %>%
mutate(recoded_gender = recode_gender(gender = Gender, dictionary = fewlevels_en)) %>%
group_by(recoded_gender) %>%
summarise(count = n()) %>%
arrange(-count) %>%
knitr::kable(caption = "Summary of gender categories after use of the *fewlevels_en* dictionary")| recoded_gender | count |
|---|---|
| woman | 4020 |
| man | 3696 |
| NA | 27 |
| sex and gender diverse | 11 |
| girl | 2 |
You can also specify a custom dictionary to replace or supplement the built-in dictionary. The custom dictionary should be a list in the following format.
# name of the vector element is the user input value and the vector element is the
# replacement value corresponding to that name as a lower case string.
custom_dictionary <- c(
masculino = "man",
hombre = "man",
mujer = "woman",
femenina = "woman"
)
str(custom_dictionary)## Named chr [1:4] "man" "man" "woman" "woman"
## - attr(*, "names")= chr [1:4] "masculino" "hombre" "mujer" "femenina"Custom dictionaries can be used in place of a built-in dictionary or can supplement the built-in dictionary by providing a vector of vectors to the dictionary argument. Where the lists contain duplicated elements, the last version of the duplicated value will be used for recoding. This allows you to use the built-in dictionary but change the coding of one or more responses from that dictionary. Here the addition of Spanish terms allows for recoding of 11 previously uncoded responses.
sample %>%
mutate(recoded_gender = recode_gender(gender = Gender,
dictionary = c(fewlevels_en,
custom_dictionary))) %>%
group_by(recoded_gender) %>%
summarise(count = n()) %>%
arrange(-count) %>%
knitr::kable(caption = "Summary of gender categories after use of the combined dictionaries")| recoded_gender | count |
|---|---|
| woman | 4021 |
| man | 3706 |
| NA | 16 |
| sex and gender diverse | 11 |
| girl | 2 |
sample %>%
mutate(recoded_gender = recode_gender(gender = Gender,
dictionary = c(fewlevels_en,
custom_dictionary))) %>%
filter(is.na(recoded_gender)) %>%
knitr::kable(caption = "All responses not classified by the combined dictionaries")| Gender | recoded_gender |
|---|---|
| 40 | NA |
| Gender | NA |
| agender (woman) | NA |
| Male. | NA |
| 54 | NA |
| % | NA |
| Female to non-binary | NA |
| Asian | NA |
| Man/Male | NA |
| demigirl | NA |
| transmasculine | NA |
| Gender | NA |
| Gender is a social construct - I’m sexually female | NA |
| Apache Helicopter… Just kidding. There are only two. I am a Male. | NA |
| Male(Sex, Gender is a silly construct) | NA |
| Transsexual male (FTM) | NA |
The retain_unmatched argument is used to determine the handling for recoding of values not contained in the dictionary. By default, unmatched values are coded as NA. retain_unmatched = TRUE will fill unmatched responses with the participant provided response.
sample %>%
mutate(recoded_gender = recode_gender(gender = Gender,
dictionary = c(fewlevels_en,
custom_dictionary),
retain_unmatched = TRUE)) %>%
group_by(recoded_gender) %>%
summarise(count = n()) %>%
arrange(-count) %>%
knitr::kable(caption = "Summary of gender categories after use of the combined dictionary and `retain_unmatched = TRUE`")## Results not matched from the dictionary have been filled with the user inputted values| recoded_gender | count |
|---|---|
| woman | 4021 |
| man | 3706 |
| sex and gender diverse | 11 |
| Gender | 2 |
| girl | 2 |
| % | 1 |
| 40 | 1 |
| 54 | 1 |
| agender (woman) | 1 |
| Apache Helicopter… Just kidding. There are only two. I am a Male. | 1 |
| Asian | 1 |
| demigirl | 1 |
| Female to non-binary | 1 |
| Gender is a social construct - I’m sexually female | 1 |
| Male. | 1 |
| Male(Sex, Gender is a silly construct) | 1 |
| Man/Male | 1 |
| transmasculine | 1 |
| Transsexual male (FTM) | 1 |
This package attempts to remove typographical errors from free text gender data. The defaults that we used are specific to our context and the time at which the package was developed and your data or context may be different.
We offer two built-in dictionaries, manylevels_en and fewlevels_en. Both are necessarily opinionated about how gender descriptors collapse into categories.
However, as these are culturally specific, they may not be suitable for your data. In particular the fewlevels_en option makes opinionated choices about some responses that we want to acknowledge are potentially problematic. Specifically,
The ‘manylevels_en’ coding separates out those who identify as trans female/male or cis female/male into separate categories it should not be assumed that all people who describe as male/female are cis, if you are assessing trans status we recommend a two part question see:
Bauer, Greta & Braimoh, Jessica & Scheim, Ayden & Dharma, Christoffer. (2017). Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations. PLoS ONE. 12.
This package is a reflection of cultural context of the package contributors. We acknowledge that understandings of gender are bound by both culture and time and are continually changing. As such, we welcome issues and pull requests to make the package more inclusive, more reflective of current understandings of gender inclusive languages and/or suitable for a broader range of cultural contexts. We particularly welcome addition of non-English dictionaries or of other gender-diverse responses to the manylevels_en and fewlevels_en dictionaries.
The “Adding to the dictionary” vignette includes information about how to make changes to the dictionary either for your own use or when contributiong to the gendercoder package.